ASI Audio 3DME Gen 2.
With the ASI Audio 3DME, you can enhance, control, and fine tune true 3D ambient audio into a personal monitor mix in any live environment.
Enhances sound
Embedded binaural mics capture full frequency and dynamic natural ambience with accurate 3D directionality. Full-range drivers give reference-quality sound without crossover distortion.
Enhances hearing health
Rapid sound limiting keeps your 3DMEs at healthy sound levels and three sizes of zero-fatigue eartips ensure a tight seal to reduce harmful stage loudness.
Custom molded eartips are available, too.
Enhances control
The ASI Audio app lets you create custom settings for each ear, with EQ and the levels of room ambience for an individualized monitor mix. Fine tune your mix during rehearsal or soundcheck, then go play!
Embedded binaural mics, a bodypack, the app, and an audiologist's magic.
3D active-ambient technology was conceived by renowned audiologist Dr. Michael Santucci of Sensaphonics for its legendary 3D AARO IEMs, used by touring pros around the world. The magic comes from tiny embedded binaural mics that bring room ambience to your monitor mix as a discrete signal while enhancing sound quality and protecting from excessive sound levels. Now this same technology is available in the new 3DME system controlled by the ASI Audio app.
Plays well with others.
The 3DME is particularly effective in acoustic and orchestral performance environments as well as amplified setups. The ASI Audio app lets you personally tune the amount of audio enhancement, levels, ambience, and equalization. Set it during rehearsal to the sound of the hall, then leave your phone or tablet behind.
ASI Audio Model 3DME Gen 2 at a glance
-
IEM
-
Bodypack
-
App
-
Specs
ACTIVE-AMBIENT™ TECHNOLOGY
Controlled 3D ambience with full earphone isolation
Embedded binaural microphones
Full frequency and dynamic range for natural ambience with accurate 3D directionality
Full range drivers
Reference-quality sound without crossover distortion
Eartips for maximum isolation
Three sizes of zero-fatigue eartips
Custom molded eartips are available.
Seal Test
Please click here.
BODYPACK
Wired to IEMs to combine monitor mix with ambient sound
Compact
Measures 72.4mm x 54mm x 25.5mm
(2.85 in. x 2.5 in. x 1.004 in.)
Patented active signal processing
Distortion-free ambience capture up to 135 dB-SPL
Tactile control
Programmable ambient up/down buttons
Rapid limiting
Clean limiting of clipping-level signals sensed at multiple circuit points
Power to last
Rechargeable Li-Ion battery via USB lasts 8 hours
LED power indicator charging status
ASI AUDIO APP
Connects via Bluetooth to bodypack for easy setup and tuning
Selectable ambience level
Left, right can be adjusted together or separately
Audio limiter threshold control function
Set left and right channels independently or link them to limit loudness
Multi-band EQ
Left, right adjusted together or separately
Specifications | |
Frequency Response |
20 Hz – 20 kHz |
Microphone Input Overload |
135 dB-SPL |
Maximum Output, 500 Hz |
122 dB-SPL |
Microphone Equivalent Input Noise |
27 dBA-SPL |
Monitor Equivalent Input Noise |
-104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged) |
Output Noise |
20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged) |
Acoustic Insertion gain |
Off, -24 dB to +12 dB in 16 steps |
Monitor Sensitivity, 500 Hz |
104 dB-SPL for -20 dBV (100 mVrms) input |
Monitor Input Impedance |
10 kOhm |
Limiter Type |
Adaptive attack, average responding, frequency selective |
Limiter Threshold |
76 dB-SPL to 104 dB-SPL in 8 steps and Off |
Maximum Limiter Gain Reduction |
20 dB |
Multiband EQ |
+/-12 dB at 60, 140, 330, 770, 1800, 4300, 10 Hz |
Latency |
0 (EQ disengaged), 540 µsec (EQ engaged) |
Operating Time (from full charge) |
~8 hours |
Charge Time (fully depleted battery) |
~5 hours |
Battery State-of-Charge Indication Wireless Connectivity |
Four LEDs, with flashing low battery warning |