ASI Audio 3DME Gen 2.
Hear incredible.

With the ASI Audio 3DME, you can enhance, control, and fine tune true 3D ambient audio into a personal monitor mix in any live environment.

Enhances sound

Embedded binaural mics capture full frequency and dynamic natural ambience with accurate 3D directionality. Full-range drivers give reference-quality sound without crossover distortion.

Enhances hearing health

Rapid sound limiting keeps your 3DMEs at healthy sound levels and three sizes of zero-fatigue eartips ensure a tight seal to reduce harmful stage loudness.
Custom molded eartips are available, too.

Enhances control

The ASI Audio app lets you create custom settings for each ear, with EQ and the levels of room ambience for an individualized monitor mix. Fine tune your mix during rehearsal or soundcheck, then go play!

Embedded binaural mics, a bodypack, the app, and an audiologist's magic.

3D active-ambient technology was conceived by renowned audiologist Dr. Michael Santucci of Sensaphonics for its legendary 3D AARO IEMs, used by touring pros around the world. The magic comes from tiny embedded binaural mics that bring room ambience to your monitor mix as a discrete signal while enhancing sound quality and protecting from excessive sound levels. Now this same technology is available in the new 3DME system controlled by the ASI Audio app.

   

3DME BTG2 - Download App  3DME BT - Download App

 

Plays well with others.

The 3DME is particularly effective in acoustic and orchestral performance environments as well as amplified setups. The ASI Audio app lets you personally tune the amount of audio enhancement, levels, ambience, and equalization. Set it during rehearsal to the sound of the hall, then leave your phone or tablet behind.

ASI Audio Model 3DME Gen 2 at a glance


ACTIVE-AMBIENT™ TECHNOLOGY
Controlled 3D ambience with full earphone isolation


Embedded binaural microphones
Full frequency and dynamic range for natural ambience with accurate 3D directionality

Full range drivers
Reference-quality sound without crossover distortion

Eartips for maximum isolation
Three sizes of zero-fatigue eartips
Custom molded eartips are available.

Seal Test
Please click here.

BODYPACK
Wired to IEMs to combine monitor mix with ambient sound


Compact
Measures 72.4mm x 54mm x 25.5mm
(2.85 in. x 2.5 in. x 1.004 in.)

Patented active signal processing
Distortion-free ambience capture up to 135 dB-SPL

Tactile control
Programmable ambient up/down buttons

Rapid limiting
Clean limiting of clipping-level signals sensed at multiple circuit points

Power to last
Rechargeable Li-Ion battery via USB lasts 8 hours
LED power indicator charging status

ASI AUDIO APP
Connects via Bluetooth to bodypack for easy setup and tuning


Selectable ambience level
Left, right can be adjusted together or separately

Audio limiter threshold control function
Set left and right channels independently or link them to limit loudness

Multi-band EQ
Left, right adjusted together or separately

Specifications

Frequency Response

20 Hz – 20 kHz

Microphone Input Overload

135 dB-SPL

Maximum Output, 500 Hz

122 dB-SPL

Microphone Equivalent Input Noise      

27 dBA-SPL

Monitor Equivalent Input Noise              

-104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged)

Output Noise                                        

20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged)

Acoustic Insertion gain                        

Off, -24 dB to +12 dB in 16 steps

Monitor Sensitivity, 500 Hz                    

104 dB-SPL for -20 dBV (100 mVrms) input

Monitor Input Impedance                      

10 kOhm

Limiter Type                                        

Adaptive attack, average responding, frequency selective

Limiter Threshold                                

76 dB-SPL to 104 dB-SPL in 8 steps and Off

Maximum Limiter Gain Reduction          

20 dB

Multiband EQ                                      

+/-12 dB at 60, 140, 330, 770, 1800, 4300, 10 Hz

Latency                                              

0 (EQ disengaged), 540 µsec (EQ engaged)

Operating Time (from full charge)          

~8 hours

Charge Time (fully depleted battery)      

~5 hours

Battery State-of-Charge Indication            

Wireless Connectivity

Four LEDs, with flashing low battery warning